9fans archive / 1996 / 02 / 33 /    prev next

From: Thomas Riemer triemer@bab...
Subject: CD-Rom configuration
Date: Mon, 19 Feb 1996 19:10:51 -0500

I finally received the CD-ROM from Harcourt Brace, etc...

So, now I'm going through the throes of trying to get 
the stuff off of CD-Rom.

Here's what I've run into.
1. I had an old SoundBlaster card (before SoundBlaster-16). So
   I upgraded to SoundBlaster-16
2. The new SoundBlaster-16 only have an ide connector - they don't
   have the way cool 4 proprietary pinouts.  
3. Ok, so that says I should configure the CD-ROM as an IDE, right?
4. I install the CD-ROM under DOS.   It tells me that its talking 
   on 0x168 (quarternairy) IRQ 10.  And in fact, I can change directories
   to the "E:" drive and actually do a nice little dir... and get what
   looks like the right stuff. 

5. Here's the strange part... when I configure the CD-ROM from the
   "blue screen of configuration" as an ATAPI (IDE) on 0x168, IRQ 10, 
   it never generates any information in plan9.ini.  I know that other
   changes I make are reflected there.   

6. When I try to install from the CD-Rom to the local drive - all of the
   options I choose either hang or tell me that I didn't configure any
   such drive. 

I'm wondering, is there a magic incantation that I can put into plan9.ini
so that it will understand that cdrom0 is a ide cd-rom on port 0x168, irq 10?

If so, would someone be kind enough to send me the information?

If not, has anyone successfully read the cd off of a scsi cd-rom?  

-Tom

---- Where theory and reality meet. 
---- Thomas Riemer, triemer@wes...